Dipping machine and its application
Durken machine is a powerful and precise tool for cutting all kinds of sheets (MDF, HDF, chipboard, ...) and wood. The structure of this machine is designed in such a way that with the movement of the spindle rail, the workpiece moves towards the main saw of the machine and the cutting process takes place. The Durkan machine cuts with a saw blade. Due to the simple and accurate operation of this device, easy operation and low depreciation, the router has played a significant role in the wood industry since the distant past and is considered one of the most widely used machines in the wood industry.
Components
Rail:
The movement of the doorknob rail on the chassis of the machine is one of the most important factors affecting the efficiency of this machine. In this field, the Altendorf company invented the rail car and had a monopoly for many years. The wagon rail has a lifetime warranty. In this system, movement is done by wheels like train wheels on rails with an elliptical cross-section. Smooth movement without vibration and lagging made this rail the most popular and efficient rail in Durkan machines. Bearings or roller bearings are used in other spindles. Due to the difference in the alloys between the rail and the car bullet, one of the components is corroded and causes the rail to loosen. This incident has a destructive effect on the movement of the rail and the quality of the product produced by this machine will decrease.
Electric motor:
Durken motor transmits the power needed by the saw for cutting through the belt. According to Foley with different diameters, different powers can be produced for the cutting process.
The main saw unit and the female line: due to the different designs that are produced, they have the ability to move at an angle in different ways. Different movement systems of the saw unit affect the quality of Persian sawing in Dorkan. It should be noted that in the angled cutting mode, the cutting line is inactive.
The movement and stability of the saw unit in the angle causes different qualities in the cut workpiece. Durken Robland uses its exclusive system in this field. Altendorf lathes have an exclusive system in the movement system of the saw unit, which has the most accurate movement, and therefore, after cutting, a unique quality is observed in the work piece.
Sawy Gonia:
In addition to straight cutting, the Durkan machine also has the ability to cut at angles between 90 and 45 degrees.
The sack of the desk table: low production quality desks are always weak when it comes to angle cutting, and this weakness cannot be overcome. One of the most important factors that make Durkans different is the structure and chassis of this device. Having a solid and strong structure always keeps other components in the most optimal position and increases the quality of the product.
Types of Diprifer's Machine and its Application
Main engine: The main engine rotates the saw blade and performs the cutting operation.
Machine rail: The machine rail is where the workpiece is placed to move for cutting. Rails have various technologies for movement, the best of which is the rail wagon invented by Altendorf, Germany.
The table behind the saw: the table behind the saw is where part of the work piece is stored.
Gunya (back of the saw, front): By placing the gunya on the table behind the gunya, the workpiece can be sized on it.
Sheet holder: It is a tool that fixes the workpiece on the rail, which maintains the safety of the operator during cutting.
Front cutting table: It is used to cut the workpiece in larger pieces.
Gonya in the middle of the rail: This gonya can be used for cutting in triangle mode (at an angle).
The above items are the main components, but in some machines, there are operator panels, additional saw storage, laser units, etc. as options.